How can we help you? Search Web Site Home
Character Generator Agile Modulator Demodulator Converter Distribution Products Pricelist Download Catalog Information--Tech Support--
About Us

INSTALLER INSTRUCTIONS AND PRODUCT SUPPORT

Hand[ MCT3201] [ MCT3204 ] [ MC3215 ] [ MODULATOR ] [ PROCESSOR ]

INSTALLER INSTRUCTIONS MCT3201

MCT3201 Application
  1. Connect the Character Generator / Titler into the AC 117 V [220 V] Outlet.
  2. Connect as per diagram video output to the input of the modulator. Monitor output to a monochrome or colour monitor.
    3. Camera or external video signal to the camera/video input.
  3. Follow the sign-on message of the character generator. Put Alpha/Lock in UP position.
  4. For operating the Character Generator follow the HELP-pages by pressing [CTRL] [V] or [CTRL] [M].
    5. Type information onto the pages, then program the pages for display into a sequence for the crawl line as follows.
  5. Press [CTRL] [Q] to Clear Page Sequence
  6. Select the page to be displayed: [CTRL] [P] advance page or [CTRL] [O] backpage.
  7. Register the page with [CTRL] [R]. Follow the on-screen menu: press ENTER
  8. Repeat steps 6. and 7. as many times as required to program the sequence of pages desired.
  9. Note: Change of colour between pages adds one full line of spaces into sequence, same colour adds only one space for wraparound capability.
  10. Press the [ALPHA/LOCK] key down and the video output to the modulator is activated. Note: In off line editing mode camera/video signal is present on the modulator.

Back to top

INSTALLER INSTRUCTIONS MCT3204

MCT3204 Application
  1. Connect the Character Generator / Camera Titler into the AC 117 V [220 V] Outlet.
  2. Connect as per diagram video output to the input of the modulator. Monitor output to a monochrome or colour monitor. Camera 1 to the Camera 1 input. Optional camera 2 in a split screen application to Camera 2 input. Note: When operating two or more camera's with a switcher, all camera's in the installation should be gen-locked to each other.
  3. Follow the sign-on message of the Character Generator. Put Alpha/Lock in UP position.
  4. For operating the Character Generator follow the HELP-pages by pressing [CTRL] [V] or [CTRL] [M]. Type information onto the pages, then program the pages for display into a sequence.
  5. Press [CTRL] [Q] to Clear Page Sequence
  6. Select the page to be displayed: [CTRL] [P] advance page or [CTRL] [O] backpage.
  7. Select camera display [CTRL] [F] (toggle) - full page or scrolling split screen display. [CTRL] [1] - selects one camera, [CTRL] [2] - selects two camera's. When selecting two camera's only left half of first camera and right half of second camera picture are displayed.
  8. Register the page with [CTRL] [R]. Follow the on-screen menu: Enter the time in seconds and press [ENTER] for full page sequence display. Press [ENTER] for scrolling in a split screen selection.
  9. Repeat steps 6., 7. and 8. as many times as required to program the sequence of pages desired.
  10. Select the Crawl Line Page, [CTRL] [P] and register it with [CTRL] [A].
  11. Press the [ALPHA/LOCK] key down and the video output to the modulator is activated.
    12. Note: In off line editing mode camera 1 video signal is present on the modulator.

Back to top

INSTALLER INSTRUCTIONS MC3215

MC3215 Application
  1. Connect the Character Generator into the AC 117 V [220 V] Outlet.
  2. Connect as per diagram video output to the input of the modulator. Monitor output to a monochrome or colour monitor.
  3. Follow the sign-on message of the Character Generator. Put Alpha/Lock in UP position.
  4. For operating the Character Generator follow the HELP-pages by pressing [CTRL] [V] or [CTRL] [M]. Type information onto the pages, then program the pages for display into a sequence.
  5. Press [CTRL] [Q] to Clear Page Sequence
  6. Select the page to be displayed: [CTRL] [P] advance page or [CTRL] [O] backpage.
  7. Register the page with [CTRL] [R]. Follow the on-screen menu: Enter the time in seconds and press [ENTER] for full page sequence display.
  8. Repeat steps 6. and 7. as many times as required to program the sequence of pages desired.
  9. Select the Crawl Line Page, [CTRL] [P] and register it with [CTRL] [A].
  10. Press the [ALPHA/LOCK] key down and the video output to the modulator is activated.

Back to top

INSTALLER INSTRUCTIONS

MM303/MM453/MM653/MM800/MM4650/MM4800

Modulator Application

GENERAL INFORMATION

The Modulator is a solid state high performance frequency agile headend modulator, allowing system reconfiguration at the push of a button. The button is located behind the front panel, beside the channel display. A small plastic tool or pen is used and inserted through the hole to advance the channel. Last data entry to select channels is automatically stored in nonvolatile memory. After powerfailure, the unit initializes to the set channel when power comes on. Adjustments are for video level, sound carrier, audio level and rf-output. Recommended installation equipment of a Field Strength Meter and a TV/Monitor is needed when interfacing the signal to CATV, the signals must be balanced and losses calculated.. Audio input is 600 Ohms unbalanced. If-Loop is unfiltered.

PROGRAMMING THE MODULATOR

  1. Insert a small plastic tool or pen through button hole and press until channel display is advanced to the desired channel.
  2. Last channel location is stored in nonvolatile memory. No battery back up is needed in case of power failure.
  3. IF-Loop is unfiltered. To connect scrambling systems, do not increase unity gain since it will affect the performance of the modulator's spurious output, signal level, etc.
  4. Set Rf-output level with Spectrum Analyzer or Field strength Meter or consult your Cable Company.
  5. Note: In cases of malfunction unplugging the modulator from power line will reset and reinitializing will activate previous settings.

CALCULATE THE INSERTION LOSS

CATV-Spectrum Typical Installation
TV-Spectrum Calculate Losses
Cable Loss Rf-Out
LOSS IN DIRECTIONAL COUPLER 16 dB
CABLE LOSS 100ft AT 500 MHz ~6 dB
TOTAL INSERTION LOSS 22 dB
CATV-SIGNAL 33 dB/mV
REQUIRED OUTPUT 55 dB/mV
========

Back to top

INSTALLER INSTRUCTIONS MP301/MP801

Processor Application

GENERAL INFORMATION

The MP301 / 801 is a solid-state high performance frequency agile headend processor / converter, allowing system reconfiguration at the push of a button. The buttons are located behind the front panel, beside the channel display. A small plastic tool or pen is used and inserted through the hole to advance the channel. Last data entry to select channels is automatically stored in nonvolatile memory [no battery backup necessary]. After power failure, the unit initializes to the set channel when power comes on. Adjustments for -10dB sound carrier reduction are done with the sound control. Output gain control is accessible from the rear panel. Use only for small adjustments, pad down signal.

PROGRAMMING THE PROCESSOR

  1. Insert small plastic tool or pen through buttonhole and press until channel display is advanced to desired channel.
  2. Last channel location is stored in nonvolatile memory. No battery back up needed in case of power failure.
  3. Set Rf-level with Spectrum Analyzer or Field strength Meter or consult the Cable Company.
  4. Note: In case of malfunction unplugging the processor from power line will reset and reinitializing will activate previous settings.
  5. When rack mounted avoid heat build up, allow for ventilation.
    6. Install for 2 units one ventilation panel. For closed racks a ventilation fan is recommended.


Back to top

http://www.mastervideo.com